Systematic review and network meta-analysis of restorative therapy and adhesive strategies in root caries lesions.

AIM: This systematic review and network meta-analysis (NMA) aimed to establish a clinically relevant hierarchy of the different adhesive and/or restorative approaches to restore cavitated root caries lesions through the synthesis of available evidence. MATERIALS AND METHODS: A systematic search was conducted in Medline/Web of Science/Embase/ Cochrane Library/Scopus/grey literature. RCTs investigating ≥2 restorative strategies (restorative /adhesive materials) for root caries lesions in adult patients were included. Risk of bias within studies was assessed (Cochrane_RoB-2) and the primary outcome was survival rate of restorations at different follow-up times (6-/12-/24-months). Network meta-analyses were conducted using a random effects model stratified by follow-up times. I2-statistics assessed the ratio of true to total variance in the observed effects. All available combinations of adhesives (1-SE: one-step self-etch; 2-3ER: two-/three-step etch-and-rinse) and restorative materials (conventional composite (CC) as well as conventional and resin-modified glass ionomer cements (GIC, RMGIC)) were included. Risk of bias across studies and confidence in NMA (CINeMA) were assessed. RESULTS: 547 studies were identified and nine were eligible for the NMA. In total, 1263 root caries lesions have been restored in 473 patients in the included clinical trials. Patients involved were either healthy (n = 6 trials), living in nursing homes (n = 1 trial) or received head-and-neck radiotherapy (n = 2 trials). There was statistically weak evidence to favour either of material/material combination regarding the survival rate. A tendency for higher survival rate (24-months) was observed for 2-3ER/CC (OR24mths 2.65; 95%CI=1.45/4.84) as well as RMGIC (OR24mths 2.05; 95%CI=1.17/3.61) compared to GIC. These findings were though not statistically significant and confidence of the NMA was low. CONCLUSION: An evidence-based choice of restorative strategy for managing cavitated root caries lesions is currently impossible. There is a clear need for more standardised, well-designed RCTs evaluating the retention rate of root caries restoration approaches.

Evaluation of the masking efficacy of caries infiltration in post-orthodontic initial caries lesions: 1-year follow-up.

OBJECTIVES: This study aimed to qualitatively and quantitatively assess the masking efficacy and color stability of resin infiltration on post-orthodontic ICL after 1 year. MATERIALS AND METHODS: In 17 adolescents, 112 ICL (ICDAS-1: n = 1; ICDAS-2: n = 111) in 112 teeth were treated by resin infiltration (Icon, DMG) 3 to 12 months after bracket removal. The etching procedure was performed up to 3 times. Standardized digital images were taken before treatment (T0), 7 days (T7) and 12 months (T365) after treatment. Outcomes included the evaluation of the color differences between infiltrated and healthy enamel at T0, T7, and T365 by quantitative (colorimetric analysis (ΔE), ICDAS scores) and qualitative methods (5-point Likert scale (deteriorated (1), unchanged (2), improved, but not satisfying (3), improved and no further treatment required (4), completely masked (5)).) Differences between time points were analyzed by using Friedman test (ΔΕ) and chi-square tests (ICDAS). RESULTS: The median color difference (25th/75th percentiles) between carious and healthy enamel at baseline (ΔΕ0) was 10.2(7.7/13.6). A significant decrease was observed 7 days after treatment (ΔΕ7 = 3.1(1.8/5.0); p < 0.001; ICDAS; p < 0.001). No significant changes based on ΔΕ (p = 1.000), and ICDAS grade (p = 0.305) were observed between T7 and T365 (ΔΕ12 = 3.4 (1.8/4.9)). Furthermore, at T365 four experienced dentists classified 55% and 39% of the lesions as "improved and no further treatment required" and "completely masked," respectively (Fleiss kappa: T365 = 0.851 (almost perfect)). CONCLUSION: Resin infiltration efficaciously masked post-orthodontic ICL 7 days and 12 months after treatment. These results for most of the teeth could not only be observed by quantitative but also by qualitative analysis. CLINICAL RELEVANCE: Resin infiltration efficaciously masks post-orthodontic initial carious lesions. The optical improvement can be observed directly after treatment and remains stable for at least 12 months.

Re- and demineralization characteristics of dentin depending on fluoride application and baseline characteristics in situ.

OBJECTIVES: The aim of this double-blinded, randomized, cross-over in situ study was to evaluate the re- and demineralization characteristics of sound dentin as well as highly and lowly demineralized dentin after the application of different fluoride concentrations. METHODS: In each of four experimental legs of four weeks 20 participants wore intraoral mandibular appliances containing two (highly demineralized [EH]) bovine enamel and four (lowly and highly demineralized [DL,DH]) bovine dentin specimens (n = 480). Each specimen included one sound (ST) and one demineralized lesion area (DT). The four randomly allocated treatments included the following dentifrices: fluoride-free, zinc-carbonate-nano-hydroxyapatite [nHA0], 0 ppm F- [negative control,NaF0], 1100 ppm F- as NaF [standard therapy,NaF1100] and 5000 ppm F- as NaF [positive control,NaF5000]. Differences in integrated mineral loss (ΔΔZ) and lesion depth (ΔLD) were calculated between values before and after the in situ period using transversal microradiography. RESULTS: After the in situ period specimens of nHA0 and NaF0 showed signs of demineralization, indicated by significantly lower ΔZ&LD values for EH and DL (only nHA0)(p ≤ 0.028), whereas specimens of NaF1100 and NaF5000 showed signs of remineralization, indicated by significantly higher ΔZ values for EH (only NaF5000), DL and DH (p ≤ 0.012). The correlation between ΔΔZDT/ΔΔZST and F- was moderate for EH(rDT = 0.497;rST = 0.463) and DL(rDT = 0.575;rST = 0.598) and strong for DH(rDH = 0.700;rST = 0.611)(p < 0.001). No significant differences for ΔΔZDT/ΔΔZST were observed between nHA0 and NaF0(p ≥ 0.333;ANCOVA). CONCLUSION: The present in situ model was capable to reveal a fluoride dose-response on sound, lowly and highly demineralized dentin and also enamel specimens. Furthermore, both fluoride-free dentifrices, one containing nanohydroxyapatite, did not hamper demineralization. CLINICAL SIGNIFICANCE: The present in situ model was capable to reveal a fluoride dose-response on dentin similar to the anticipated clinical efficacy. Highly demineralized specimens seem to be recommendable for measuring anti-caries effects on dentin in situ. Furthermore both fluoride-free dentifrices, one containing nanohydroxyapatite, did not hamper demineralization. The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00011653).

Influence of highly concentrated fluoride dentifrices on remineralization characteristics of enamel in vitro.

OBJECTIVES: The aim of this in vitro study was to evaluate the role of highly fluoridated dentifrice on remineralization characteristics of lowly and highly pre-demineralized enamel artificial caries lesions. METHODS: Bovine enamel specimens were prepared (pH 4.95; 21 days) and discriminated in either lowly [L] or highly [H] pre-demineralized artificial caries lesions. Specimens with a mean ΔZbaseline,L (95% CI) of 5120 (4995; 5245) vol.% × µm and a mean ΔZbaseline,H of 8187 (8036; 8339) vol.% × µm were selected and randomly allocated to 12 groups (n = 20). Treatments during pH-cycling (28 days; 6 × 60 min demineralization/day) were brushing 2×/day with fluoride-free (0 ppm F- [L0/H0]), 1100 ppm F- [L1100/H1100], 2800 ppm F- [L2800/H2800], 5000 ppm F- [L5000/H5000], 5000 ppm F- + glycerin [L5000 + glycerin/H5000 + glycerin], and 5000 ppm F- + TCP [L5000 + TCP/H5000 + TCP] containing dentifrices. Dentifrice slurries were prepared with deionized water (1:3wt/wt). After cycling specimens presenting lesion surface loss were discarded and for the remaining 202 specimens, transversal microradiographic (TMR) analyses (ΔZpH-cycle/LDpH-cycle) were performed again. Changes in mineral loss (ΔΔZ = ΔZbaseline - ΔZpH-cycle) and lesion depth (ΔLD = LDbaseline - LDpH-cycle) were calculated. RESULTS: Significant differences for ΔΔZ could be found between L0, L1100, and L5000 as well as H0, H1100, and H2800/H5000 (p ≤ 0.01; ANCOVA). Except for 0 ppm F-, higher ΔΔZ could be found in highly compared with lowly demineralized specimens (p ≤ 0.004; ANCOVA). After pH-cycling, a second lesion front could only be observed in H5000 and H5000 + TCP. The correlation between ΔΔZ and F- was moderate for lowly and highly demineralized lesions (rL = 0.591; pL < 0.001; rH = 0.746; pH < 0.001), indicating a fluoride dose response for both. CONCLUSION: For both baseline substrate conditions, a dose response for fluoride could be revealed. CLINICAL SIGNIFICANCE: Remineralization characteristics of enamel directly depended on baseline mineral loss.

A New Laser-Processing Strategy for Improving Enamel Erosion Resistance.

In the present study, a new automatic laser-processing strategy allowing standardized irradiation of natural tooth areas was investigated. The objective was to find a combination of laser parameters that could cause over a 600°C temperature increase at the enamel surface while not damaging enamel, avoiding temperature change above 5.5°C in the pulp and increasing enamel erosion resistance. Seventy-seven bovine enamel samples were randomly divided into 6 laser groups and 1 negative control (C/no treatment/ n = 11). A scanning strategy (7 × 3 mm) was used for the CO2 laser treatment (λ = 10.6 µm, 0.1-18 J/cm2) with different pulse durations-namely, 20 µs (G20), 30 µs (G30), 55 µs (G55), and 490 µs (G490), as well as 2 modified pulse distances (G33d, G40d). Measurements of temperature change were performed at the surface (thermal camera/50 Hz), at the underside (thermocouples), and at the pulp chamber using a thermobath and human molars ( n = 10). In addition, histology and X-ray diffraction (XRD/ n = 10) were performed. Erosion was tested using an erosive cycling over 6 d, including immersion in citric acid (2 min/0.05 M/pH = 2.3) 6 times daily. Surface loss was measured using a profilometer and statistical analysis with a 2-way repeated-measures analysis of variance (α = 0.05). Only G20 fulfilled the temperature requirements at the surface (619 ± 21.8°C), at the underside (5.3 ± 1.4°C), and at the pulp (2.0 ± 1.0°C), and it caused no mineral phase change and significant reduction of enamel surface loss (-13.2 ± 4.0 µm) compared to C (-37.0 ± 10.1 µm, P < 0.05). A laser-scanning strategy (20 µs/2 kHz/1.25 J/cm2, 3.4 mm/s) has been established that fulfilled the criteria for biological safety and significantly increased enamel erosion resistance (64%) in vitro.

Effects of dentifrices differing in fluoride compounds on artificial enamel caries lesions in vitro.

The aim of this study was to compare the caries-preventive effect of a stabilized stannous fluoride/sodium fluoride dentifrice containing sodium hexametaphosphate with those of a regular, solely sodium fluoride-containing and amine fluoride-containing dentifrice on pre-demineralized bovine enamel specimens using a pH-cycling model. Bovine enamel specimens with two artificial lesions each were prepared. Baseline mineral loss of both lesions was analyzed using transversal microradiography (TMR). Eighty-five specimens with a mean (SD) baseline mineral loss of 3393 (683) vol% × µm were selected and randomly allocated to five groups (n = 13/15). Treatments during pH-cycling (28 days and 2 × 20 min demineralization/day) were: brushing twice daily with slurries of AmF (1400 ppm F-), NaF (1450 ppm F-), SnF2/NaF (1100 ppm F-/350 ppm F-), and fluoride-free (FF) dentifrices or they were immersed in distilled water and remained unbrushed (NB). Subsequently, from each specimen one lesion was covered with acid-resistant varnish, while the remaining lesion was demineralized for another 14 days. Differences in integrated mineral loss (∆∆Z) were calculated between values before and after pH-cycling (∆∆Z E1) as well as before pH-cycling and after second demineralization (∆∆Z E2) using TMR. Treatments AmF and NaF induced a significantly higher mineral gain (∆∆Z E1/∆∆Z E2) compared to treatments FF and NB (p < 0.05; ANOVA test). Except for treatments AmF and NaF no significant differences in mineral loss between before and after pH-cycling could be observed (p < 0.05; t test) [∆∆Z E1: AmF:1563 (767); NaF:1222 (1246); SnF2/NaF:258 (1259); FF:-52 (1223); NB:-151 (834)]. Both dentifrices with either AmF or NaF promoted remineralization, whereas SnF2/NaF dentifrice did not promote remineralization in a biofilm-free pH-cycling model.

Caries-preventive effect of anti-erosive and nano-hydroxyapatite-containing toothpastes in vitro.

OBJECTIVES: The aim of the study was to investigate the caries-preventive effect of newly developed fluoride and fluoride-free toothpastes specially designed for erosion prevention. The hypothesis was that these products might also show superior caries-inhibiting effect than regular fluoride toothpastes, since they were designed for stronger erosive acid challenges. MATERIALS AND METHODS: Enamel specimens were obtained from bovine teeth and pre-demineralized (pH = 4.95/21 days) to create artificial caries lesions. Baseline mineral loss (ΔZB) and lesion depth (LDB) were determined using transversal microradiography (TMR). Ninety specimens with a median ΔZB (SD) of 6027 ± 1546 vol% × µm were selected and randomly allocated to five groups (n = 18). Treatments during pH-cycling (14 days, 4 × 60 min demineralization/day) were brushing 2×/day with AmF (1400 ppm F-, anti-caries [AC]); AmF/NaF/SnCl2/Chitosan (700 ppm F-/700 ppm F-/3500 ppm Sn2+, anti-erosion [AE1]); NaF/KNO3 (1400 ppm F-, anti-erosion [AE2]); nano-hydroxyapatite-containing (0 ppm F-, [nHA]); and fluoride-free toothpastes (0 ppm F-, negative control [NC]). Toothpaste slurries were prepared with mineral salt solution (1:3 wt/wt). After pH-cycling specimens presenting lesion, surface loss (mainly by NC and nHA) were discarded. For the remaining 77 specimens, new TMR analyses (ΔZE/LDE) were performed. Changes in mineral loss (ΔΔZ = ΔZB - ΔZE) and lesion depth (ΔLD = LDB - LDE) were calculated. RESULTS: All toothpastes caused significantly less demineralization (lower ΔΔZ) than NC (p < 0.05, ANOVA) except for nHA. The fluoride toothpastes did not differ significantly regarding ΔΔZ and ΔLD (p > 0.05, ANOVA). CONCLUSION/CLINICAL RELEVANCE: While both anti-erosive and anti-caries toothpastes reduced mineral loss to a similar extent, the fluoride-free nano-hydroxyapatite-containing toothpaste seemed not to be suitable for inhibition of caries demineralization in vitro.

Prevention of toothbrushing abrasion of acid-softened enamel by CO(2) laser irradiation.

OBJECTIVE: The aim of the present study was to evaluate the effect of CO(2) laser irradiation (10.6µm) at 0.3J/cm(2) (0.5µs; 226Hz) on the resistance of softened enamel to toothbrushing abrasion, in vitro. METHODS: Sixty human enamel samples were obtained, polished with silicon carbide papers and randomly divided into five groups (n=12), receiving 5 different surface treatments: laser irradiation (L), fluoride (AmF/NaF gel) application (F), laser prior to fluoride (LF), fluoride prior to laser (FL), non-treated control (C). After surface treatment they were submitted to a 25-day erosive-abrasive cycle in 100ml sprite light (90s) and brushed twice daily with an electric toothbrush. Between the demineralization periods samples were immersed in supersaturated mineral solution. At the end of the experiments enamel surface loss was determined using a contact profilometer and morphological analysis was performed using scanning electron microscopy (SEM). For SEM analysis of demineralization pattern, cross-sectional cuts of cycled samples were prepared. The data were statistically analysed by one-way ANOVA model with subsequent pairwise comparison of treatments. RESULTS: Abrasive surface loss was significantly lower in all laser groups compared to both control and fluoride groups (p<0.0001 in all cases). Amongst the laser groups no significant difference was observed. Softened enamel layer underneath lesions was less pronounced in laser-irradiated samples. CONCLUSION: Irradiation of dental enamel with a CO(2) laser at 0.3J/cm(2) (5µs, 226Hz) either alone or in combination with amine fluoride gel significantly decreases toothbrushing abrasion of softened-enamel, in vitro.

Rehardening of acid-softened enamel and prevention of enamel softening through CO2 laser irradiation.

OBJECTIVES: The aims of the present study were to investigate whether irradiation with a CO(2) laser could prevent surface softening (i) in sound and (ii) in already softened enamel in vitro. METHODS: 130 human enamel samples were obtained and polished with silicon carbide papers. They were divided into 10 groups (n = 13) receiving 5 different surface treatments: laser irradiation (L), fluoride (AmF/NaF gel) application (F), laser prior to fluoride (LF), fluoride prior to laser (FL), non-treated control (C); and submitted to 2 different procedures: half of the groups was acid-softened before surface treatment and the other half after. Immersion in 1% citric acid was the acid challenge. Surface microhardness (SMH) was measured at baseline, after softening and after treatment. Additionally, fluoride uptake in the enamel was quantified. The data were statistically analysed by two-way repeated measurements ANOVA and post hoc comparisons at 5% significance level. RESULTS: When softening was performed either before or after laser treatment, the L group presented at the end of the experiments SMH means that were not significantly different from baseline (p = 0.8432, p = 0.4620). Treatment after softening resulted for all laser groups in statistically significant increase in SMH means as compared to values after softening (p < 0.0001). Enamel fluoride uptake was significantly higher for combined laser-fluoride treatment than in control (p<0.0001). CONCLUSION: Irradiation of dental enamel with a CO(2) laser at 0.3J/cm(2) (5 µs, 226 Hz) not only significantly decreased erosive mineral loss (97%) but also rehardened previously softened enamel in vitro.

Dentine caries inhibition through CO(2) laser (10.6µm) irradiation and fluoride application, in vitro.

OBJECTIVE: The purpose of the study was to investigate whether dentine irradiation with a pulsed CO(2) laser (10.6µm) emitting pulses of 10 ms is capable of reducing dentine calcium and phosphorus losses in an artificial caries model. DESIGN: The 90 dentine slabs obtained from bovine teeth were randomly divided into six groups (n=15): negative control group (GC); positive control group, treated with fluoride 1.23% (GF); and laser groups irradiated with 8 J/cm(2) (L8); irradiated as in L8+fluoride 1.23% (L8F); irradiated with 11 J/cm(2) (L11); irradiated as in L11+fluoride 1.23% (L11F). After laser irradiation the samples were submitted to a pH-cycling model for 9 days. The calcium and phosphorous contents in the de- and remineralization solutions were measured by means of inductively coupled plasma optical emission spectrometer--ICP-OES. Additionally intrapulpal temperature measurements were performed. The obtained data were analysed by means of ANOVA and Tukey's test (α=0.05). RESULTS: In the demineralization solutions the groups L11F and GF presented significantly lower means of calcium and phosphorous losses than the control group; and in L11F means were significantly lower than in the fluoride group. Both irradiation parameters tested caused intrapulpal temperature increase below 2°C. CONCLUSION: It can be concluded that under the conditions of this study, CO(2) laser irradiation (10.6 µm) with 11 J/cm(2) (540 mJ and 10 Hz) of fluoride treated dentine surfaces decreases the loss of calcium and phosphorous in the demineralization process and does not cause excessive temperature increase inside the pulp chamber.

CO2 Laser (10.6 microm) parameters for caries prevention in dental enamel.

Although CO(2) laser irradiation can decrease enamel demineralisation, it has still not been clarified which laser wavelength and which irradiation conditions represent the optimum parameters for application as preventive treatment. The aim of the present explorative study was to find low-fluence CO(2) laser (lambda = 10.6 microm) parameters resulting in a maximum caries-preventive effect with the least thermal damage. Different laser parameters were systematically evaluated in 3 steps. In the first experiment, 5 fluences of 0.1, 0.3, 0.4, 0.5 and 0.6 J/cm(2), combined with high repetition rates and 10 micros pulse duration, were chosen for the experiments. In a second experiment, the influence of different pulse durations (5, 10, 20, 30 and 50 micros) on the demineralisation of dental enamel was assessed. Finally, 3 different irradiation times (2, 5 and 9 s) were tested in a third experiment. In total, 276 bovine enamel blocks were used for the experiments. An 8-day pH-cycling regime was performed after the laser treatment. Demineralisation was assessed by lesion depth measurements with a polarised light microscope, and morphological changes were assessed with a scanning electron microscope. Irradiation with 0.3 J/cm(2), 5 micros, 226 Hz for 9 s (2,036 overlapping pulses) increased caries resistance by up to 81% compared to the control and was even significantly better than fluoride application (25%, p < 0.0001). Scanning electron microscopy examination did not reveal any obvious damage caused by the laser irradiation.